100W/150W 12V monocrystalline silicon solar panel DC for vehicle RV marine battery charger
2. Dedicated to charging 12V batteries and 5V devices.
3. High output 3000mAh USB, which can fully charge iX under the maximum power of 1.5h.
4. Monocrystalline solar cells have an efficiency of up to 21%.
5.4x eyelets and 2x free hook loops make installation more convenient.
6. IP65 waterproof, suitable for outdoor use in light rain.
Maximum power: 100W/150W
Maximum power: 12V
Material: EVA + PET
Panel size: 600x350mm/450*350mm
DC output cable length: 300mm
Net weight: 2380g/1380g
About the controller:
1. It has a controller, which can protect the battery well.
2. The controller is adaptive for 12V and 24V.
3. Usually a 10A controller is sufficient to meet the requirements of the panel, that is, the Ipmax is about 2.0A. If you want to use this controller in other higher power solar systems, you can also choose 20A or 30A.
1. It can be used as an alternative charger for cars, trucks, caravans, ships, motorcycles, RV batteries or any 12V lead-acid batteries.
1. Connect the DC alligator clip for standard 12V battery.
2. Connect the DC cigarette lighter plug clip to charge the car battery.
3. Attention! Do not make the positive and negative poles of the alligator clip touch or connect to each other, otherwise it will cause short circuit and burn.
1 100W/150W Solar Panel
1x Power cord
1x 30A Solar Controller
The junction box of this panel is installed on the back! Therefore, it is not suitable to be pasted on the roof of a vehicle.
1. Please stay away from highly corrosive materials!
2. Do not scratch the surface with hard objects!
3. Do not bend it more than 10°, although its size is small but very flexible!
4. Do not modify the circuit without authorization, because this is not a DIY panel, otherwise it may cause damage to the product! Don’t
5. Do not put the side of the junction box under heavy rain, because it is only IP65 waterproof!
- Certification: NONE
- Origin: CN(Origin)